Sovol SH01 Filament Dehydrator with Upgraded Fan for 1.75mm & 2.85mm Filament

Product Details Sheet

Remove Excess Moisture

3D printer filaments can absorb moisture, potentially leading to printing failures. The Sovol SH01 effectively removes excess moisture, ensuring your filament stays dry and producing better prints. With smoother surfaces and improved layer adhesion, you can say goodbye to brittle PLA, PETG, and ABS filaments.

Real-time Monitoring of Temp and Humidity Inside

Monitor the humidity and temperature inside the dry box in real-time. You can set the temperature at 40°C, 45°C, or 50°C and choose the drying time from 6 to 12 hours. If you use the SH01 in a room with a temperature below 16°C, the internal temperature won't reach 50°C. However, this won't affect the drying efficiency.

Excellent Power-off Drying Mode

The silicone and PTFE seals allow the dry box to store filaments without power, protecting them from moisture and dirt. You can add 4 desiccant bags (not included) to enhance drying efficiency and quality.

Large Capacity

The Sovol dryer box can accommodate up to 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. During heating, make sure to open the PTFE seals at the top of the box to ensure moisture evaporation.

Heating More Evenly

The unique design of the built-in fan, based on aerodynamic principles, ensures even heating of the filament. This makes the drying process more efficient. If you have any questions about the product, feel free to contact us for assistance.

You Must Know...

When placing the filament into the filament outlet, ensure it is inserted counterclockwise for better pulley feeding. If the screen shows errors E0 and E1, open the dry box and check all cable sockets on the motherboard for damage or loose connections. Should you encounter any issues, please let us know for a replacement.

If you have any other questions or need further assistance, please reach out to our technical support team.